Architect's & Engineer's Specifications

The 2-way bi-amplified ribbon line source array loudspeaker system shall have an operating bandwidth of 100 Hz to 20 kHz, measured on axis at 1 meter in an anechoic environment, with +3/- 6 dB tolerance. The maximum peak output level shall be 130 dB for the low frequencies, and 131 dB for the high frequencies when measured at a distance of one meter with full system output. The woofer loaded into the cabinet shall be a Neo Black Widow 12” 8 Ohms woofer. The tweeter drivers shall be two RD 2.6 MK III ribbon tweeters loaded onto a CLEAR FORM Waveguide. The bi-amplified speaker amplifiers shall have a total power output of 3,400 Watts peak, and the power amps shall be fan cooled. Signal input shall be provided via XLR analog and Dante Ethernet connections. The analog output Thru connector shall be a male XLR for daisy-chaining to the next cabinet as needed. DSP signal processing shall be incorporated to provide the crossover, protective filtering and EQ for the system, as well as limiting and compression to minimize overdrive distortion. The cabinet shall incorporate rigging hardware to interface with the FlyQWIK rigging system. The outside dimensions shall be 15.13 inches (384 mm) high by 25.06 inches (637 mm) wide by 15.19 inches (386 mm) deep. The weight shall be 75 pounds (34.1 kg). The loudspeaker system shall be a Crest Audio model Versarray PRO 112 or approved equivalent.